Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

다운로드
페이지 225
Wireless
MAC Filtering
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
87
5
Bandwidth Utilization
To change bandwidth utilization settings:
STEP 1
Select Wireless > Bandwidth Utilization in the navigation pane.
STEP  2
Click Enable to enable Bandwidth Utilization, or uncheck Enable to disable bandwidth 
utilization.
STEP  3
If bandwidth utilization is enabled, in the Maximum Utilization Threshold box, enter the 
percentage of network bandwidth utilization allowed on the radio before the WAP device stops 
accepting new client associations.
The valid integer range is from 0 to 100 percent. The default is 70 percent. When set to 0, all 
new associations are allowed regardless of the utilization rate.
STEP  4
Click Save. The changes are saved to the Startup Configuration. 
NOTE
After new settings are saved, the corresponding processes may be stopped and restarted. When 
this happens, the WAP device may lose connectivity. We recommend that you change WAP 
device settings when a loss of connectivity will least affect your wireless clients. 
MAC Filtering
Media Access Control (MAC) filtering can be used to exclude or allow only listed client 
stations to authenticate with the access point. MAC authentication is enabled and disabled per 
VAP on the 
 page. Depending on how the VAP is configured, the WAP device may 
refer to a MAC filter list stored on an external RADlUS server, or may refer a MAC filter list 
stored locally on the WAP device.