Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼
Client Quality of Service
Client QoS Status
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
133
7
After switching the packet or frame to the outbound interface, the ACL's rules are
checked for a match. The packet or frame is transmitted if it is permitted and discarded
if it is denied.
checked for a match. The packet or frame is transmitted if it is permitted and discarded
if it is denied.
•
ACL Type Up—The type of ACL that is applied to traffic in the inbound (client-to-
WAP) direction, which can be one of these options:
WAP) direction, which can be one of these options:
-
IPv4—The ACL examines IPv4 packets for matches to ACL rules.
-
IPv6—The ACL examines IPv6 packets for matches to ACL rules.
-
MAC—The ACL examines Layer 2 frames for matches to ACL rules.
•
ACL Name Up—The name of the ACL applied to traffic entering the WAP device in
the inbound direction.
the inbound direction.
When a packet or frame is received by the WAP device, the ACL's rules are checked for
a match. The packet or frame is processed if it is permitted and discarded if it is denied.
a match. The packet or frame is processed if it is permitted and discarded if it is denied.
•
DiffServ Policy Down—The name of the DiffServ policy applied to traffic from the
WAP device in the outbound (WAP-to-client) direction.
WAP device in the outbound (WAP-to-client) direction.
•
DiffServ Policy Up—The name of the DiffServ policy applied to traffic sent to the WAP
device in the inbound (client-to-WAP) direction.
device in the inbound (client-to-WAP) direction.
STEP 6
Click Save. The changes are saved to the Startup Configuration.
Client QoS Status
The Client QoS Status page shows the client QoS settings that are applied to each client
currently associated with the WAP device.
currently associated with the WAP device.
To show the Client QoS Status page, select Client QoS > Client QoS Status in the navigation
pane.
pane.