Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼
Single Point Setup
Access Points
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
160
10
STEP 1
Go to the web-based configuration utility on the standalone access point.
STEP 2
Select Single Point Setup > Access Points in the navigation pane.
STEP 3
Set the Cluster name to the same name that is configured for the cluster members.
STEP 4
(Optional) In the Location field, enter a description of where the access point is physically
located, for example, Reception.
located, for example, Reception.
STEP 5
(Optional) In the Priority field, enter a value between 0 to 255.
STEP 6
Click Enable Single Point Setup.
The access point automatically joins the Single Point Setup.
Removing an Access Point from a Single Point Setup Cluster
Removing an Access Point from a Single Point Setup
To remove an access point from the Single Point Setup cluster:
STEP 1
In the table showing the detected devices, click the IP address for the clustered WAP device
you want to remove.
you want to remove.
The web-based configuration utility for that WAP device shows.
STEP 2
Select Single Point Setup > Access Points in the navigation pane.
STEP 3
Click Disable Single Point Setup.
The Single Point Setup status field for that access point will now show Disabled.