Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

Single Point Setup

Cluster Firmware Upgrade

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

171

STEP 1

Click Refresh.

To upgrade the firmware on a cluster member using TFTP:

STEP 1

Select TFTP for Transfer Method.

STEP 2

Enter a name (1 to 256 characters) for the image file in the Source File Name field, including
the path to the directory that contains the image to upload.

For example, to upload the ap_upgrade.tar image located in the /share/builds/ap
directory, enter: /share/builds/ap/ap_upgrade.tar

The firmware upgrade file supplied must be a tar file. Do not attempt to use bin files or
files of other formats for the upgrade; these types of files do not work.

The filename cannot contain the following items: spaces, <, >, |, \, : , (, ), &, ; , #, ? , *,
and two or more successive periods.

STEP 3

Enter the TFTP Server IPv4 Address and click Start-Upgrade.

To upgrade using HTTP:

STEP 1

Select HTTP for Transfer Method.

STEP 2

If you know the name and path to the new file, enter it in the New Firmware Image field.
Otherwise, click the Browse button and locate the firmware image file on your network.

The firmware upgrade file supplied must be a tar file. Do not attempt to use bin files or
files of other formats for the upgrade; these types of files do not work.

STEP 3

Click Start-Upgrade to apply the new firmware image.

NOTE

Overall upgrade status shows the combined upgrade status (Not Initialized/In Progress/
Completed/Fail/Abort_admin/ None) of all the cluster members.

To stop the cluster member upgrade from Dominant AP: