Cisco Cisco WAP551 Wireless-N Single Radio Selectable Band Access Point 관리 매뉴얼

Simple Network Management Protocol

Views

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

133

8

These notes summarize some critical guidelines regarding SNMPv3 view configuration. 
Please read all the notes before proceeding.

NOTE

A MIB view called all is created by default in the system. This view contains all management 
objects supported by the system.

NOTE

By default, view-all and view-none SNMPv3 views are created on the WAP device. These 
views cannot be deleted or modified.

SNMP Views

To add and configure an SNMP view:

STEP 1

Select SNMP > Views in the navigation pane.

STEP  2

Click Add to create a new row in the SNMPv3 Views table. 

STEP  3

Check the box in the new row and click Edit:

•

View Name—Enter a name that identifies the MIB view. View names can contain up to 
32 alphanumeric characters.

•

Type—Choose whether to include or exclude the view subtree or family of subtrees 
from the MIB view.

•

OID—Enter an OID string for the subtree to include or exclude from the view. 

For example, the system subtree is specified by the OID string .1.3.6.1.2.1.1. 

•

Mask—Enter an OID mask. The mask is 47 characters in length. The format of the OID 
mask is xx.xx.xx (.)... or xx:xx:xx.... (:) and is 16 octets in length. Each octet is two 
hexadecimal characters separated by either a period (.) or a colon (:). Only hex 
characters are accepted in this field. 

For example, OID mask FA.80 is 11111010.10000000.

A family mask is used to define a family of view subtrees. The family mask indicates 
which subidentifiers of the associated family OID string are significant to the family's 
definition. A family of view subtrees enables efficient control access to one row in a 
table.