Cisco Cisco WAP551 Wireless-N Single Radio Selectable Band Access Point 관리 매뉴얼
Status and Statistics
Traffic Statistics
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
17
2
To change any of these settings, click the Edit link. After you click Edit, you are
redirected to the VLAN and IPv4 Address Settings page. See
redirected to the VLAN and IPv4 Address Settings page. See
for descriptions of these fields.
•
Radio Status—These settings include the Wireless Radio mode (Enabled or Disabled),
the MAC address associated with the radio interface (or both radio interfaces for
WAP561 devices), the 802.11 mode (a/b/g/n), and the channel used by the interface.
the MAC address associated with the radio interface (or both radio interfaces for
WAP561 devices), the 802.11 mode (a/b/g/n), and the channel used by the interface.
To change the wireless settings, click the Edit link. After you click Edit, you are
redirected to the Radio page. See
redirected to the Radio page. See
for descriptions of these fields.
•
Interface Status—This table lists status information for each Virtual Access Point
(VAP) and on each Wireless Distribution System (WDS) interface. On WAP561
devices, WLAN0 or WLAN1 precedes the VAP interface ID to indicate the associated
radio interface. WLAN0 represents radio 1 and WLAN1 represents radio 2.
(VAP) and on each Wireless Distribution System (WDS) interface. On WAP561
devices, WLAN0 or WLAN1 precedes the VAP interface ID to indicate the associated
radio interface. WLAN0 represents radio 1 and WLAN1 represents radio 2.
If the VAP has been configured, the table lists the SSID, the administrative status (up
or down), the MAC address of the radio interface, the VLAN ID, the name of any
associated scheduler profile, and the current state (active or inactive). The state
indicates whether the VAP is exchanging data with a client.
or down), the MAC address of the radio interface, the VLAN ID, the name of any
associated scheduler profile, and the current state (active or inactive). The state
indicates whether the VAP is exchanging data with a client.
You can click Refresh to refresh the screen and show the most current information.
Traffic Statistics
Use the Traffic Statistics page to view basic information about the WAP. It also provides a
real-time display of transmit and receive statistics for the Ethernet interface, the Virtual Access
Points (VAPs), and any WDS interfaces. All transmit and receive statistics reflect the totals
since the WAP was last started. If you reboot the WAP, these figures indicate transmit and
receive totals since the reboot.
real-time display of transmit and receive statistics for the Ethernet interface, the Virtual Access
Points (VAPs), and any WDS interfaces. All transmit and receive statistics reflect the totals
since the WAP was last started. If you reboot the WAP, these figures indicate transmit and
receive totals since the reboot.
To show the Traffic Statistics page, select Status and Statistics > Traffic Statistics in the
navigation pane.
navigation pane.