Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

Groups

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

134

Select SNMP > Groups in the navigation pane.

Click Add to create a new row in the SNMPv3 Groups table.

Check the box for the new group and click Edit.

Configure the parameters:

•

Group Name—A name that identifies the group. The default group names 
are RO and RW. 

Group names can contain up to 32 alphanumeric characters.

•

Security Level—Sets the security level for the group, which can be one of 
these options:

-

noAuthentication-noPrivacy—No authentication and no data 
encryption (no security).

-

Authentication-noPrivacy—Authentication, but no data encryption. 
With this security level, users send SNMP messages that use an MD5 
key/password for authentication, but not a DES key/password for 
encryption.

-

Authentication-Privacy—Authentication and data encryption. With this 
security level, users send an MD5 key/password for authentication and a 
DES key/password for encryption. 

For groups that require authentication, encryption, or both, you must 
define the MD5 and DES key/passwords on the SNMP Users page.

•

Write Views—The write access to MIBs for the group, which can be one of 
these options:

-

view-all—The group can create, alter, and delete MIBs.

-

view-none—The group cannot create, alter, or delete MIBs.

•

Read Views—The read access to MIBs for the group:

-

view-all—The group is allowed to view and read all MIBs.

-

view-none—The group cannot view or read MIBs.

Click Save. The group is added to the SNMPv3 Groups list and your changes are 
saved to the Startup Configuration.

To remove a group, select the group in the list and click Delete.