Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

WorkGroup Bridge Transmit/Receive

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

16

The WorkGroup Bridge Transmit/Receive page shows packet and byte counts for 
traffic between stations on a WorkGroup Bridge. For information on configuring 
WorkGroup Bridges, see 

.

To show the WorkGroup Bridge Transmit/Receive page, select Status and 
Statistics > WorkGroup Bridge in the navigation pane.

Each network interface that is configured as a WorkGroup Bridge interface shows 
these fields:

•

Network Interface—Name of the Ethernet or VAP interface. On WAP561 
devices, WLAN0 represents radio 1 and WLAN1 represents radio 2.

•

Status and Statistics—Whether the interface is disconnected or is 
administratively configured as up or down.

•

VLAN ID—Virtual LAN (VLAN) ID. You can use VLANs to establish multiple 
internal and guest networks on the same WAP device. The VLAN ID is set on 
the VAP tab.

•

Name (SSID)—Wireless network name. Also known as the SSID, this 
alphanumeric key uniquely identifies a wireless local area network. The 
SSID is set on the VAP tab. 

Additional information appears for the transmit and receive direction for each 
WorkGroup Bridge interface:

•

Total Packets—The total number of packets bridged between the wired 
clients in the WorkGroup Bridge and the wireless network.

•

Total Bytes—The total number of bytes bridged between the wired clients 
in the WorkGroup Bridge and the wireless network.

You can click Refresh to refresh the screen and show the most current information.

You can use the Associated Clients page to view the client stations associated 
with a particular access point.

To show the Associated Clients page, select Status and Statistics > Associated 
Clients in the navigation pane.