Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

IPv6 Addresses

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

54

This VLAN is also the default untagged VLAN. If you already have a 
management VLAN configured on your network with a different VLAN ID, you 
must change the VLAN ID of the management VLAN on the WAP device.

Configure these IPv4 settings:

•

Connection Type—By default, the DHCP client on the Cisco WAP551 and 
WAP561 Access Point automatically broadcasts requests for network 
information. If you want to use a static IP address, you must disable the DHCP 
client and manually configure the IP address and other network information.

Select one of these values from the list:

-

DHCP—The WAP device acquires its IP address from a DHCP server on 
the LAN.

-

Static IP—You manually configure the IPv4 address. The IPv4 address 
should be in a form similar to xxx.xxx.xxx.xxx (192.0.2.10).

•

Static IP Address, Subnet Mask, and Default Gateway—If you elected to 
assign a static IP address, enter the IP information.

•

Domain Name Servers—Select an option from the list:

-

Dynamic—The WAP device acquires DNS server addresses from a 
DHCP server on the LAN.

-

Manual—You manually configure one or more DNS server addresses. 
Enter up to two IP addresses in the text boxes. 

Click Save. The changes are saved to the Startup Configuration.

After new settings are saved, the corresponding processes may be stopped and 
restarted. When this happens, the WAP device may lose connectivity. We 
recommend that you change WAP device settings when a loss of connectivity will 
least affect your wireless clients. 

You can use the IPv6 Addresses page to configure the WAP device to use IPv6 
addresses.

To configure IPv6 address settings: