Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

Scheduler

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

82

-

Administrative Mode is disabled—Operational status is down because 
global configuration is disabled.

To add a profile, enter a profile name in the Scheduler Profile Configuration text 
box and click Add. The profile name can be up to 32 alphanumeric characters. 

You can configure up to 16 rules for a profile. Each rule specifies the start time, end 
time and day (or days) of the week the radio or VAP can be operational. The rules 
are periodic in nature and are repeated every week. A valid rule must contain all of 
the parameters (days of the week, hour, and minute) for the start time and the end 
time. Rules cannot conflict; for example, you can configure one rule to start on each 
weekday and another to start on each weekend day, but you cannot configure one 
rule to begin daily and another rule to begin on weekends. 

To configure a rule for a profile:

Select the profile from the Select a Profile Name list.

Click Add Rule. 

The new rule shows in the rule table. 

Check the box next to the Profile Name and click Edit.

From the Day of the Week menu, select the recurring schedule for the rule. You 
can configure the rule to occur daily, each weekday, each weekend day (Saturday 
and Sunday), or any single day of the week.

Set the start and end times:

•

Start Time—The time when the radio or VAP is operationally enabled. The 
time is in HH:MM 24-hour format. The range is <00-23>:<00-59>. The default 
is 00:00.

•

End Time—The time when the radio or VAP is operationally disabled. The 
time is in HH:MM 24-hour format. The range is <00-23>:<00-59>. The default 
is 00:00.

Click Save. The changes are saved to the Startup Configuration.

A Scheduler profile must be associated with a radio interface or a VAP interface to 
be in effect. See the 

 page.

To delete a rule, select the profile from the Profile Name column and click Delete.