Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

WorkGroup Bridge

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

91

-

•

VLAN ID—The VLAN associated with the BSS.

The Infrastructure Client Interface will be associated with the 

upstream WAP device with the configured credentials. The WAP device may 
obtain its IP address from a DHCP server on the upstream link. Alternatively, 
you can assign a static IP address. The Connection Status field indicates 
whether the WAP is connected to the upstream WAP device. You can click 
the Refresh button at the top of the page to view the latest connection 
status.

Configure the following additional fields for the Access Point Interface:

•

Status—Select Enable for the Access Point Interface.

•

SSID—The SSID for the Access Point Interface does not need to be the 
same as the Infrastructure Client SSID. However, if attempting to support a 
roaming type of scenario, the SSID and security must be the same. 

•

SSID Broadcast—Select if you want the downstream SSID to be broadcast. 
SSID Broadcast is enabled by default.

•

Security—The type of security to use for authenticating. Choices are:

-

-

-

•

MAC Filtering—Select one of these options:

-

Disabled—The set of clients in the APs BSS that can access the 
upstream network is not restricted to the clients specified in a MAC 
address list.

-

Local—The set of clients in the APs BSS that can access the upstream 
network is restricted to the clients specified in a locally defined MAC 
address list.

-

RADIUS—The set of clients in the APs BSS that can access the upstream 
network is restricted to the clients specified in a MAC address list on a 
RADIUS server.

If you select Local or RADIUS, see 

 for instructions on creating 

the MAC filter list.