Cisco Cisco WAP551 Wireless-N Single Radio Selectable Band Access Point 관리 매뉴얼
Simple Network Management Protocol
General SNMP Settings
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
130
8
The community name acts as a simple authentication feature to restrict the
machines on the network that can request data to the SNMP agent. The
name functions as a password, and the request is assumed to be authentic
if the sender knows the password.
machines on the network that can request data to the SNMP agent. The
name functions as a password, and the request is assumed to be authentic
if the sender knows the password.
•
Read-write Community—A read-write community name to be used for
SNMP set requests. The valid range is from 1 to 256 alphanumeric and
special characters.
SNMP set requests. The valid range is from 1 to 256 alphanumeric and
special characters.
Setting a community name is similar to setting a password. Only requests
from the machines that identify themselves with this community name are
accepted.
from the machines that identify themselves with this community name are
accepted.
•
Management Station—Determines which stations can access the WAP
device through SNMP. Select one of these options:
device through SNMP. Select one of these options:
-
All—The set of stations that can access the WAP device through SNMP
is not restricted.
is not restricted.
-
User Defined—The set of permitted SNMP requests is restricted to
those specified.
those specified.
•
NMS, IPv4 Address/Name—The IPv4 IP address, DNS hostname, or subnet
of the network management system (NMS), or the set of machines that can
execute get and set requests to the managed devices.
of the network management system (NMS), or the set of machines that can
execute get and set requests to the managed devices.
A DNS hostname can consist of one or more labels, which are sets of up to
63 alphanumeric characters. If a hostname includes multiple labels, each is
separated by a period (.). The entire series of labels and periods can be up
to 253 characters long.
63 alphanumeric characters. If a hostname includes multiple labels, each is
separated by a period (.). The entire series of labels and periods can be up
to 253 characters long.
As with community names, this setting provides a level of security on SNMP
settings. The SNMP agent only accepts requests from the IP address,
hostname, or subnet specified here.
settings. The SNMP agent only accepts requests from the IP address,
hostname, or subnet specified here.
To specify a subnet, enter one or more subnetwork address ranges in the
form address/mask_length where address is an IP address and
mask_length is the number of mask bits. Both formats address/mask and
address/mask_length are supported. For example, if you enter a range of
192.168.1.0/24, this specifies a subnetwork with address 192.168.1.0 and a
subnet mask of 255.255.255.0.
form address/mask_length where address is an IP address and
mask_length is the number of mask bits. Both formats address/mask and
address/mask_length are supported. For example, if you enter a range of
192.168.1.0/24, this specifies a subnetwork with address 192.168.1.0 and a
subnet mask of 255.255.255.0.
The address range is used to specify the subnet of the designated NMS.
Only machines with IP addresses in this range are permitted to execute get,
and set requests on the managed device. Given the example above, the
machines with addresses from 192.168.1.1 through 192.168.1.254 can
execute SNMP commands on the device. (The address identified by suffix .0
Only machines with IP addresses in this range are permitted to execute get,
and set requests on the managed device. Given the example above, the
machines with addresses from 192.168.1.1 through 192.168.1.254 can
execute SNMP commands on the device. (The address identified by suffix .0