Cisco Cisco WAP551 Wireless-N Single Radio Selectable Band Access Point 관리 매뉴얼

Scheduler Association

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

83

The Scheduler profiles need to be associated with the WLAN interface or a VAP 
interface to be effective. By default, there are no Scheduler profiles created, and 
no profile is associated with any radio or VAP. 

Only one Scheduler profile can be associated with the WLAN interface or each 
VAP. A single profile can be associated with multiple VAPs. If the Scheduler profile 
associated with a VAP or the WLAN interface is deleted, then the association is 
removed.

To associate a Scheduler profile with the WLAN interface or a VAP:

Select Wireless > Scheduler Association in the navigation pane. For WAP561 
devices, select the Radio interface on which you want to associate a scheduler 
profile (Radio 1 or Radio 2).

For the WLAN interface or a VAP, select the profile from the Profile Name list.

The Interface Operational Status column shows whether the interface is 
currently enabled or disabled.

Click Save. The changes are saved to the Startup Configuration.

Use the Bandwidth Utilization page to configure how much of the radio bandwidth 
can be used before the WAP device stops allowing new client associations. This 
feature is enabled by default.

To change bandwidth utilization settings:

Select Wireless > Bandwidth Utilization in the navigation pane.

Click Enable to enable Bandwidth Utilization, or uncheck Enable to disable 
bandwidth utilization.

If bandwidth utilization is enabled, in the Maximum Utilization Threshold box, 
enter the percentage of network bandwidth utilization allowed on the radio before 
the WAP device stops accepting new client associations.