Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point 관리 매뉴얼
Administration
User Accounts
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
27
3
STEP 1
Select Administration > User Accounts in the navigation pane.
The User Account Table shows the currently configured users. The user cisco is
preconfigured in the system to have Read/Write privileges.
preconfigured in the system to have Read/Write privileges.
All other users can have Read Only Access, but not Read/Write access.
STEP 2
Click Add. A new row of text boxes appears.
STEP 3
Check the box for the new user and select Edit.
STEP 4
Enter a User Name between 1 to 32 alphanumeric characters. Only numbers 0 to
9 and letters a to z (upper or lower) are allowed for user names.
9 and letters a to z (upper or lower) are allowed for user names.
STEP 5
Enter a New Password between 1 and 64 characters and then enter the same
password in the Confirm New Password text box.
password in the Confirm New Password text box.
As you enter a password, the number and color of vertical bars changes to
indicate the password strength, as follows:
indicate the password strength, as follows:
•
Red—The password fails to meet the minimum complexity requirements.
•
Orange—The password meets the minimum complexity requirements but
the password strength is weak.
the password strength is weak.
•
Green—The password is strong.
STEP 6
Click Save. The changes are saved to the Startup Configuration.
NOTE
To delete a user, select the check box next to the user name and select Delete. To
save your deletion permanently, select Save when complete.
save your deletion permanently, select Save when complete.
To change a user password:
STEP 1
Select Administration > User Accounts in the navigation pane.
The User Account Table shows the currently configured users. The user cisco is
preconfigured in the system to have Read/Write privileges. The password for the
user cisco can be changed.
preconfigured in the system to have Read/Write privileges. The password for the
user cisco can be changed.
STEP 2
Select the user to configure and click Edit.
STEP 3
Enter a New Password between 1 and 64 characters and then enter the same
password in the Confirm New Password text box.
password in the Confirm New Password text box.