Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

Class Map

Cisco WAP571/E Administration Guide

124

-

Destination IP Mask—Enter the destination IP address mask.

•

Destination Port—Includes a destination port in the match condition for the 
rule. The destination port is identified in the datagram header.

-

Select From List—Matches the destination port in the datagram header 
with the selected keyword: ftp, ftpdata, http, smtp, snmp, telnet, tftp, 
www. Each of these keywords translates into its equivalent port number. 

-

Match to Port—Matches the destination port in the datagram header 
with an IANA port number that you specify. The port range is from 0 to 
65535 and includes three different types of ports:

0 to 1023-Well Known Ports

1024 to 49151-Registered Ports

49152 to 65535-Dynamic and/or Private Ports

-

Mask—The port mask. The mask determines which bits are used and 
which bits are ignored. Only the hexadecimal digit (0-0xFFFF) is allowed. 
1 means the bit matters and 0 means that we should ignore this bit.

•

Service Type—Specifies the type of service to use in matching the 
packets to the class criteria.

-

IP DSCP Select From List—Choose a DSCP value to use as a match 
criterion.

-

IP DSCP Match to Value—Enter a custom DSCP value from 0 to 63.

-

IP Precedence—Matches the packet's IP precedence value to the IP 
precedence value defined in this field. The IP precedence range is from 
0 to 7.

-

IP ToS Bits—Uses the packet's type of service (ToS) bits in the IP header 
as the match criteria. The IP ToS bit value ranges between (00 to FF). The 
high-order three bits represent the IP precedence value. The high-order 
six bits represent the IP DSCP value.