Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

Policy Map

Cisco WAP571/E Administration Guide

129

•

VLAN ID—Specified the VLAN ID to be matched for the packets. The VLAN 
ID range is from 0 to 4095.

Click Save. The changes are saved to the Startup Configuration.

To delete a class map, choose it in the Class Map Name list and click Delete. The 
class map cannot be deleted if it is already attached to a policy.

Packets are classified and processed based on defined criteria. The classification 
criteria is defined by a class on the 

 page. The processing is defined by 

a policy's attributes on the Policy Map page. Policy attributes may be defined on a 
per-class instance basis and determine how traffic that matches the class criteria 
is handled.

The WAP device supports up to 50 policy maps. A policy map can contain up to 
10 class maps.

To add and configure a policy map:

Select Client QoS > Policy Map.

In the Policy Map Name field, enter the name for the policy map. The name can 
include from 1 to 31 alphanumeric characters and special characters. Spaces are 
not allowed.

Click Add Policy Map. 

In the Policy Class Definition area, configure these parameters for the policy map:

•

Policy Map Name—Choose the policy map to configure.

•

Class Map Name—Choose the class map to apply this policy.

•

Police Simple—Establishes the traffic policing style for the class. The 
simple form of the policing style uses a single data rate and burst size, 
resulting in two outcomes: conform and nonconform.

If you enable this feature, configure one of these fields: