Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

Download/Backup Configuration File

Cisco WAP571/E Administration Guide

50

recover a system configuration after a factory reset by copying the Mirror 
Configuration to the Startup Configuration.

In addition to downloading and uploading these files to another system, you can 
copy them to different file types on the WAP device. See 

To back up (upload) the configuration file to a network host or TFTP server:

Select Administration > Download/Backup Configuration File in the navigation 
pane.

Select Via TFTP or Via HTTP/HTTPS as the Transfer Method.

Select Backup (AP to PC) as the Save Action.

For a TFTP backup only, enter the Destination File Name with an .xml extension. 
Also include the path where the file is to be placed on the server and then enter 
the TFTP Server IPv4 Address.

The filename cannot contain the following characters: spaces, <, >, |, \, : , (, ), &, ; , #, 
? , *, and two or more successive periods.

For a TFTP backup only, enter the TFTP Server IPv4 Address.

Select which configuration file you want to back up: 

•

Startup Configuration—Configuration file type used when the WAP device 
last booted. This does not include any configuration changes applied but not 
yet saved to the WAP device.

•

Backup Configuration—Backup configuration file type saved on the WAP 
device.

•

Mirror Configuration—If the Startup Configuration is not modified for at 
least 24 hours, it is automatically saved to a Mirror Configuration file. The 
Mirror Configuration file is a snapshot of a past Startup Configuration. The 
Mirror Configuration is preserved across factory resets, so it can be used to 
recover a system configuration after a factory reset by copying the Mirror 
Configuration to the Startup Configuration.

Click Save to begin the backup. For HTTP backups, a window appears to enable 
you to browse to the desired location for saving the file.