Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

Scheduler

Cisco WAP571/E Administration Guide

99

Select the profile from the Select a Profile Name list.

Click Add Rule. 

The new rule shows in the rule table. 

Check the box next to the Profile Name and click Edit.

From the Day of the Week menu, select the recurring schedule for the rule. You 
can configure the rule to occur daily, each weekday, each weekend day (Saturday 
and Sunday), or any single day of the week.

Set the start and end times:

•

Start Time—The time when the radio or VAP is operationally enabled. The 
time is in HH:MM 24-hour format. The range is <00-23>:<00-59>. The default 
is 00:00.

•

End Time—The time when the radio or VAP is operationally disabled. The 
time is in HH:MM 24-hour format. The range is <00-23>:<00-59>. The default 
is 00:00.

Click Save. The changes are saved to the Startup Configuration.

A Scheduler profile must be associated with a radio interface or a VAP interface to 
be in effect. See the 

 page.

To delete a rule, select the profile from the Profile Name column and click Delete.

The scope of scheduler rules is described here.

•

A rule that sets only a specific day does not affect the other days.

•

A rule that uses groups such as “Daily,” “Weekday,” or “Weekend” affects 
multiple days.

•

A rule you set for “Weekend” would only affect Saturday and Sunday while 
the rest of the days are unaffected. The default scheduler behavior is that 
the radio is enabled when there is no explicit rule on that day control how 
long the radio should be enabled. 

•

The design of the scheduler feature is such that each rule sets a boundary 
on when a radio or VAP is enabled.