Cisco Cisco Aironet 1600e Access Point 설치 가이드

Verify that you have received the items listed below. If any item is missing or damaged, contact 
your Cisco representative or reseller for instructions.

The access point

Mounting bracket (optional; selected when you ordered the access point)

Adjustable ceiling-rail clip (optional; selected when you ordered the access point)

The 1600 series access point contains two simultaneous dual-band radios, the 2.4-GHz and 5-GHz 
802.11n MIMO radios, in controller-based mode. The radio configurations of the 1600 series access 
point are:

AIR-CAP1602E-x-K9, AIR-SAP1602E-x-K9, AIR-AP1602E-UXK9 —controller-based mode, 
with two 2.4-GHz/5-GHz dual-band radios with up to 3 external dual-band dipole antennas

AIR-CAP1602I-x-K9 and AIR-SAP1602I-x-K9, AIR-AP1602I-UXK9—controller-based mode, 
with two 2.4-GHz/5-GHz dual-band radios, with integrated dual-band inverted-F antennas

For information on the regulatory domains (shown as “x” in the model numbers) see 

The 1602E models are configured with up to three external dual-band dipole antennas, and two 
2.4-GHz/5-GHz dual-band radios. The radios and antennas support frequency bands 2400–2500 
MHz and 5150–5850 MHz through a common dual-band RF interface. Features of the external 
dual-band dipole antennas are:

Three RTNC antenna connectors on the top of the access point

Three TX and three RX antennas

These antennas are supported on the 1602E:

Antenna  Part  Number

Antenna  Type

Antenna Gain  2 GHz / 5 GHz      
(dBi)

AIR-ANT2524DB-R

Dual-resonant black dipole

2/4

AIR-ANT2524DW-R

Dual-resonant white dipole

2/4

AIR-ANT2524DG-R

Dual-resonant gray dipole

2/4