Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

(If you request a defect that cannot be displayed, the defect number might not exist, the defect might not 
yet have a customer-visible description, or the defect might be marked Cisco Confidential.) 

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. Click Technology Support, choose Wireless 

from the menu on the left and click Wireless LAN.

This section lists changes, errors, and omissions from user documentation for access points.

The command dot11 extension power native was omitted from the Cisco IOS Software Configuration 
Guide for Cisco Aironet Access Points 12.3(7)JA and Cisco IOS Command Reference for Cisco Aironet 
Access Points and Bridges 12.3(7)JA.

When enabled, the dot11 extension power native shifts the power tables the radio uses from the IEEE 
802.11 tables to the native power tables. The radio derives the values for this table from the 
NativePowerTable and NativePowerSupportedTable of the CISCO-DOT11-1F-MIB. The Native Power 
tables were designed specifically to configure powers as low as -1dBm for Cisco Aironet radios that 
support these levels.

This section lists documents related to Cisco IOS Release 12.3(7)JA2 and to 350, 1100, 1130AG, 1200, 
and 1240AG series access points.