Cisco Cisco Aironet 1200 Access Point 기술 참조
Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide
Implementing the Cisco SWAN Framework
17
Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide
OL-6217-01
Figure 7
CiscoSecure ACS User Setup
Step 4
Fill out the information relevant to the user, including the password, and then click Submit
(see Figure 8).
(see Figure 8).
Figure 8
CiscoSecure ACS User Setup
Step 5
Repeat Steps 2 through 4 for each credentials pair you intend on using for infrastructure authentication.
The CiscoSecure ACS setup for infrastructure access point authentication is now complete.
Configuring the Local RADIUS Server on the Access Point for Infrastructure Authentication
In environments where the AAA infrastructure does not support Cisco LEAP, the local RADIUS server
on an access point must be used for infrastructure authentication of access points. This section covers
the steps required to configure the local RADIUS server on an access point.
on an access point must be used for infrastructure authentication of access points. This section covers
the steps required to configure the local RADIUS server on an access point.