Cisco Cisco Aironet 1200 Access Point 릴리즈 노트
20
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(8)JEB
OL-11737-01
Caveats
•
CSCsd54914—802.1x reauthentication interval behavior is now correct for non-root bridge.
•
CSCsg20744—Turn off MBSSID now appears when configuring access point to sensor mode.
•
CSCsg16033—cDot11ClientStatistics & cDot11ClientConfiguration messages are now consistent
with workgroup bridges.
with workgroup bridges.
•
CSCsb78160—Access point system error messages updated in documentation.
•
CSCsg91315—WDS does now returns reports to WLSE
•
CSCed45578—Console no longer locks after booting with system accounting.
•
CSCeg62070—Tracebacks no longer occur during HTTP transactions with long URLs.
•
CSCdk32069—AAA authorization if-authenticated is now a terminating method.
•
CSCse67605—CLI displays a warning for fallback repeater mode when attempting to change role.
•
CSCse77577—Ambiguous command on modifying snmp trap receiver no longer occurs.
•
CSCsf95967—Access point now forwards packets from an AeroScout server.
•
CSCsg05807—7920 phone roaming now operates correctly with MBSSID enabled.
•
CSCsg58791—Client now can ping to a gateway via the native VLAN.
•
CSCsg71594—CLI no longer permits configuring both EAP and WPA-PSK on the same SSID.
•
CSCsg80960—Access point no longer reloads when receiving multicast from an unconfigured
dot1q VLAN.
dot1q VLAN.
•
CSCsh33598—Access point now conforms with mainstream IOS behavior.
•
CSCsh47853—show dot11 associations command now shows correct output bytes.
•
CSCsh71209—Disabling Aironet extensions on root now prevents repeater joining.
•
CSCsh71226—It is no longer possible for a repeater to send traffic directly to the native VLAN.
•
CSCsh80023—Apostrophe in hostname no longer causes GUI to malfunction.
•
CSCsh83796—Repeater access point no longer loses association after association MAC list
reconfiguration.
reconfiguration.
•
CSCsh85001—Access point GUI now displays time zone name as an offset of GMT.
•
CSCsb58098—MBSSID enabled hot standby access point now EAP associates to a primary access
point.
point.
•
CSCsg68227—QoS class parameters for CWmax are no longer reset after radio interface shut down.
If You Need More Information
If you need information about a specific caveat that does not appear in these release notes, you can use
the Cisco Bug Toolkit to find select caveats of any severity. Click this URL to browse to the Bug Toolkit:
the Cisco Bug Toolkit to find select caveats of any severity. Click this URL to browse to the Bug Toolkit:
(If you request a defect that cannot be displayed, the defect number might not exist, the defect might not
yet have a customer-visible description, or the defect might be marked Cisco Confidential.)
yet have a customer-visible description, or the defect might be marked Cisco Confidential.)