Cisco Cisco Aironet 1200 Access Point 설치 가이드

다운로드
페이지 33
30
1.
Determine the location where you want to mount the access point.
2.
Attach two caddy fasteners to the ceiling’s T-rail.
3.
Use the mounting bracket to adjust the distance between the caddy 
fasteners so that they align with the holes in the mounting bracket.
4.
Use a standard screwdriver to tighten the caddy fastener studs in place 
on the T-rail. Do not overtighten.
5.
Install a plastic spacer on each caddy fastener stud. The spacer’s legs 
should contact the ceiling grid T-rail.
6.
Attach the mounting bracket to the caddy fastener studs and start a Keps 
nut on each stud.
7.
Use a wrench or pliers to tighten the Keps nuts. Do not overtighten.
8.
Attach the access point to the mounting bracket.
Attaching the Access Point to the Mounting 
Bracket
Follow these steps to attach the access point to the mounting bracket.
1.
Line up the three mounting pins on the access point with the large ends 
of the keyhole-shaped holes on the mounting bracket.
2.
Insert the access point into the keyhole shaped holes and maintain a 
slight pressure to hold it in place.