Cisco Cisco Aironet 1250 Series Access Point 설치 가이드
7
Quick Start Guide: Cisco Aironet 1250 Series Access Point
ENGLISH
These documents are also available on cisco.com. Follow this link:
Make sure that you are using a computer connected to the same network as
the access point, and obtain the following information from your network
administrator:
the access point, and obtain the following information from your network
administrator:
•
A host name for the access point.
•
The case-sensitive SSID for your 802.11 radio network.
•
A Simple Network Management Protocol (SNMP) community name and
the SNMP file attribute (if SNMP is in use).
the SNMP file attribute (if SNMP is in use).
•
The Media Access Control (MAC) address from the label on the bottom
of the access point (such as 0016462584c), if you plan to use the Cisco
IP Setup Utility to find an access point IP address.
of the access point (such as 0016462584c), if you plan to use the Cisco
IP Setup Utility to find an access point IP address.
•
If you are not connected to a DHCP server, you can assign an IP address
to the access point using the CLI. In this situation, obtain a unique IP
address for your access point, a default gateway, and subnet mask from
your network system administrator.
to the access point using the CLI. In this situation, obtain a unique IP
address for your access point, a default gateway, and subnet mask from
your network system administrator.