Cisco Cisco Aironet 702W Access Point 설치 가이드
5
4
Unpacking
To unpack the access point, follow these steps:
Step 1
Unpack and remove the access point and the accessory kit from the shipping box.
Step 2
Return any packing material to the shipping container and save it for future use.
Step 3
Verify that you have received the items listed below. If any item is missing or damaged, contact your Cisco representative
or reseller for instructions.
or reseller for instructions.
•
The access point
•
Mounting bracket
•
Mounting screws
•
Tamper resistant screw
•
Mylar label for tamper resistant screw
5
Configurations
The 700W series access point contains two simultaneous dual-band radios, the 2.4 GHz and 5 GHz 802.11n MIMO radios, in
a controller-based mode.
a controller-based mode.
The 700W series access point configuration is two 2.4 GHz/5 GHz dual-band radios, with two integrated dual-band antennas.
Internal Antennas
The 700W series access points are configured with two dual-band antennas (two 2.4 GHz and two 5 GHz). The two antennas,
deployed inside the access point, are inside the top housing. The basic features are as follows:
deployed inside the access point, are inside the top housing. The basic features are as follows:
•
Dual-Band antennas.
•
Antenna elements integrated into 700W access point top housing.
•
Peak gains are approximately 2 dBi in the 2.4 GHz band and 4 dBi in the 5 GHz band.
Model Numbers and Regulatory Domains
The 700W series access points have the following model number formats:
•
AIR-CAP702W-x-K9, where the ‘x’ represents the regulatory domain. The 700W series supports the following regulatory
domains (shown as “x” in the model numbers): -A, -B, -C, -D, -E, -H, -I, -K, -N, -Q, -R, -S, -T, -Z
domains (shown as “x” in the model numbers): -A, -B, -C, -D, -E, -H, -I, -K, -N, -Q, -R, -S, -T, -Z
Note
Click this URL for the latest list of countries and regulatory domains supported by the
AIR-CAP702W-x-K9 models:
AIR-CAP702W-x-K9 models:
•
AIR-AP702W-UXK9, where ‘UX’ in the model number represents the universal regulatory domain. For information on how
to set the regulatory domain and country configurations of a universal regulatory domain access point, see the Cisco Aironet
Universal AP Priming and Cisco AirProvision User Guide, at:
to set the regulatory domain and country configurations of a universal regulatory domain access point, see the Cisco Aironet
Universal AP Priming and Cisco AirProvision User Guide, at:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html
Note
For information on how to set the regulatory domain and country configurations of a universal regulatory domain
access point, see the Cisco Aironet Universal AP Priming and Cisco AirProvision User Guide, at:
access point, see the Cisco Aironet Universal AP Priming and Cisco AirProvision User Guide, at:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html