Cisco Cisco Aironet 1200 Access Point 릴리즈 노트
6
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 12.4(10b)JA4
OL-17693-01
New Features
The event name selections depends on the facility name selected. Supported events and subevents for
the respective facilities are shown in the following table:
the respective facilities are shown in the following table:
The severity level specifies the maximum severity level to report and print a system logging message.
There are 8 severity levels available, which are shown in the following table:
There are 8 severity levels available, which are shown in the following table:
The following example configures severity level 3 (error conditions) for the facility system, event reload
error messages:
error messages:
ap(config)# logging facility system event reload severity errors
The following example configures severity level 1 (immediate action needed) for the facility dot11, event
radio failed error messages:
radio failed error messages:
ap(config)# logging facility dot11 radio failed severity alerts
Using the no form of the command removes the configured severity level from the configuration and
reverts to the default severity for the event.
reverts to the default severity for the event.
Facility Name
Event
Subevent
system
reload
–
dot11
uplink
radio
rogue ap
failed, down
failed
–
rogue ap
–
–
radius
down
up
up
–
link
interface
up-down, link-changed
Severity Level
Logging Severity Level Description
0. emergencies
System is unusable
1 alerts
Immediate action needed
2. critical
Critical conditions
3. errors
Error conditions
4. warnings
Warning conditions
5. notifications
Normal but significant conditions
6. informational
Informational messages
7. debugging
Debugging messages