Cisco Cisco Aironet 1200 Access Point 릴리즈 노트
17
Release Notes for Cisco Aironet 350, 1100, and 1200 Series Access Points for Cisco IOS Release 12.2(13)JA1
OL-5170-01
Troubleshooting
•
CSCec39405—The following combination of radio settings no longer reduces throughput on the
802.11a radio in 1200 series access points:
802.11a radio in 1200 series access points:
–
Fragmentation threshold set to 500
–
RTS threshold set to 256
–
WPA enabled
•
CSCec43028—The access point CLI no longer displays 40-bit WEP keys as 128-bit WEP keys.
•
CSCin44512—If 8 or more VLANs are configured on your access point, you can now apply filters
using the Apply Filters page in the web-browser interface.
using the Apply Filters page in the web-browser interface.
•
CSCin44591—PSPF now works when you use the web-browser interface to enable PSPF on a
non-native VLAN.
non-native VLAN.
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at
. Click Technology Support, select Wireless from
the menu on the left, and click Wireless LAN.
Documentation Updates
In addition to the CLI commands added to support new access point features, these commands were
added for IOS Release 12.2(13)JA1:
added for IOS Release 12.2(13)JA1:
•
boot upgrade—Use the boot upgrade global interface command to configure access points and
bridges to automatically load a configuration and use DHCP options to upgrade system software.
Use the no form of the command to prevent an access point or bridge from automatically loading a
configuration and upgrading system software.
bridges to automatically load a configuration and use DHCP options to upgrade system software.
Use the no form of the command to prevent an access point or bridge from automatically loading a
configuration and upgrading system software.
•
dot11 activity-timeout—Use the dot11 activity-timeout global configuration command to
configure the number of seconds that the access point tracks an inactive device.
configure the number of seconds that the access point tracks an inactive device.
For complete descriptions of these commands, refer to the Cisco IOS Command Reference for Cisco
Aironet Access Points and Bridges for this release.
Aironet Access Points and Bridges for this release.
Related Documentation
This section lists documents related to Cisco IOS Release 12.2(13)JA1 and to 350, 1100, and 1200 series
access points.
access points.
•
Cisco Aironet Conversion Tool for Cisco IOS Software, 2.0 Administrator Guide for Windows
•
Quick Start Guide: Cisco Aironet 350 Series Access Points
•
Quick Start Guide: Cisco Aironet 1100 Series Access Points
•
Quick Start Guide: Cisco Aironet 1200 Series Access Points
•
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
•
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
•
Installation Instructions for Cisco Aironet Power Injectors