Cisco Cisco Broadband Access Center Telco Wireless 3.10
8-19
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Chapter 8 Broadband Access Center for Cable Support Tools and Advanced Concepts
The Configuration File Utility
•
changeme—identifies the default password being used in this example
After running the utility, results similar to these should appear:
Specifying Output to a Binary File
Usage Guidelines
You use the runCfgUtil.sh command to specify a device for macro variables.
Syntax Description
You must use this syntax when using the unCfgUtil.sh command when specifying output to a binary file:
runCfgUtil.sh -l <input_file> -o <output_file>
Where:
•
-l—specifies the input file is on the local file system
•
<input_file>—identifies the input template file being parsed
•
-o—specifies that file name where the binary contents of the parsed template file are stored
•
<output_file>—specifies the output filename to be used
To specify the output from parsing a template to a binary file:
Step 1
Change directory to /opt/CSCObpr/rdu/samples/templates.
Step 2
Select a template file to use.
Step 3
Identify the name of the output file. This example will use unprov.cm.
# /opt/CSCObpr/rdu/bin/runCfgUtil.sh -l macro.tmpl -i "1,6,00:01:02:03:04:05" -u admin
-p changeme
Broadband Provisioning Registrar Configuration Utility
Version: 2.5.1.5
Outputting binary contents
Off
File Bytes
Option
Description
Value
0
030101
3
Network Access Control
On
3
041F
4
Class of Service
5
010101
4.1
Class ID
1
8
02040000FA00
4.2
Maximum Downstream Rate
64000 bits/sec
14
03040000FA00
4.3
Maximum Upstream Rate
64000 bits/sec
20
040101
4.4
Upstream Channel Priority
1
.......................................
0 error(s), 0 warning(s) detected. Parsing of macro.tmpl was successful.
The file macro.tmpl was parsed successfully in 823 ms.
The parser initialization time was 102 ms.
The parser parse time was 803 ms.