Cisco Cisco Broadband Access Center Telco Wireless 3.9
C-35
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Appendix C Device Provisioning Engine Command Line Interface
Log System Management Commands
•
•
•
•
•
•
•
•
•
•
•
•
Note
Prior to using any debug command, you must ensure that DPE debugging is enabled. Run the debug on
command to enable this function.
command to enable this function.
clear logs
Usage Guidelines
This command remove historic (out of date) log files that exist on the system. These files include:
•
DPE log files
•
hardware log files
•
syslog files
Over time, historic log files accumulate within the DPE. The support bundle state command is used to
bundle these logs. Cisco recommends that you create a bundle before clearing logs. This ensures that no
necessary files are accidently lost.
bundle these logs. Cisco recommends that you create a bundle before clearing logs. This ensures that no
necessary files are accidently lost.
Examples
This is an example of how to use the clear logs command:
dpe# clear logs
Clearing historic log files...
+ Removing 1 DPE log files...
+ No more historic logs.