Cisco Cisco FindIT 1.x 릴리즈 노트

Release Notes for Cisco FindIT Version 2.0.2

5

Be aware of the following issues when using Cisco FindIT to monitor and manage 
the network:

If HTTPS access to the administration Graphical User Interface (GUI) of 

a device is disabled, it may take up to two minutes before FindIT will connect using 
HTTP when double-clicking on the device in the Discovery view. Within those two 
minutes, the browser will report the administration GUI as being unreachable. 
(CSCut68745)

Wait for two minutes after disabling HTTPS before using FindIT to 

connect to the administration GUI; you may also manually enter the HTTP URL into 
the address bar of the browser using the IP address visible in the device 
information tooltip.

An attempt to upgrade from FindIT 1.0.x to FindIT 1.1 or higher does not 

correctly remove all components of FindIT 1.0.x. 

FindIT 1.0.x should be removed from the PC prior to running the installer 

for FindIT 1.1 or higher. Any customization made to FindIT 1.0.x will be retained 
during this process. 

Your PC must meet the following requirements to run Cisco FindIT. 

•

Operating system:

-

Microsoft Windows 7, 8 or 8.1

-

Apple OS X 10.8 or above

•

Web browser:

-

Apple Safari version 7 or above (OS X), or version 5 or above (Windows) 

-

Google Chrome version 34 or above 

-

Microsoft Internet Explorer version 10 or above

-

Mozilla Firefox 30 or above

Your network devices must meet the following requirements to be monitored and 
accessed through Cisco FindIT. 

•

Must be on the same subnet as the PC that is running Cisco FindIT.