Cisco Cisco 1 GHz GainStar Node 설치 가이드
GainStar Line Extender and Mini Node (Strand) Housing Closure Instructions
GainStar 延长放大器与 Mini 光站 (线挂) 合上外壳说明书
Purpose
This document provides instructions on how to correctly close the GainStar Line Extender
housing and Mini Node (Strand) housing.
housing and Mini Node (Strand) housing.
Audience
These instructions are intended for field service technicians installing the Line Extender or
Mini Node.
Mini Node.
Related Publications
Refer to the following publications for more information.
GainStar Line Extender (Strand) Installation and Operation Guide, part number OL-
31945
GainStar Mini Node (Strand) Installation and Operation Guide, part number OL-31947
目的
本文件提供正确闭合
GainStar 延长放大器或 Mini 光站外壳的指导说明。
使用人员
本说明针对现场安装
GainStar 延长放大器或 Mini 光站的维修服务技术人员。
相关出版物
如需获得更多信息,可参考以下出版物。
GainStar 延长放大器 (线挂) 安装与操作手册,部件号 OL-31945
GainStar Mini 光站 (线挂) 安装与操作手册,部件号 OL-31947
Tightening the Closure Bolts
Follow the steps below to tighten the closure bolts.
CAUTION:
Avoid moisture damage and RF leakage! Follow the procedure exactly as shown
below to ensure a proper seal.
below to ensure a proper seal.
1.
Inspect the housing gasket and all mating surfaces. Wipe off any dirt and debris.
2.
Close the housing and finger-tighten the closure bolts.
3
Tighten the housing closure bolts from 6.8 Nm (5 ft lbs) to 9.0 Nm (6.6 ft lbs) in
sequence as shown in the following illustration.
sequence as shown in the following illustration.
Continued on next page