Cisco Cisco 1 GHz GainStar Node 기술 참조
Suggested Hardline Connector
Installation Technical Bulletin
Installation Technical Bulletin
Overview
Purpose
This document describes tools and techniques that help to ensure a reliable
connection and proper torque when installing a hardline cable and connector into
Cisco cable system transmission equipment.
The procedures in this document are illustrated using Gilbert GRS pin type
The procedures in this document are illustrated using Gilbert GRS pin type
connectors and CommScope .500 diameter PIII hardline cable. Gilbert's own
installation instructions are used as a basis, but similar procedures apply when
using equipment and instructions from other manufacturers.
Note: This document is intended to supplement, not replace, the instructions
Note: This document is intended to supplement, not replace, the instructions
provided by the connector manufacturer. Consult the connector manufacturer's
instructions for additional information.
Audience
These installation instructions are intended for all cable system operators or
installers who need to install a hardline cable and connector into Cisco cable
system transmission equipment.
Qualified Personnel
Only appropriately qualified and skilled service personnel should attempt to
install, operate, maintain, and service this product.
WARNING:
Allow only qualified and skilled personnel to install, operate, maintain, and
Allow only qualified and skilled personnel to install, operate, maintain, and
service this product. Otherwise, personal injury or equipment damage may
occur.