Cisco Cisco MCS 7828-I3 Unified Communications Manager Appliance 문제 해결 가이드
Products & Services
MCS Server: STOP:0X0000007B
INACCESSIBLE_BOOT_DEVICE Error
Document ID: 99372
Introduction
This document describes how to troubleshoot Stop:0x0000007B error messages in
the Media Convergence Server (MCS), which also displays a blue screen while it
boots.
the Media Convergence Server (MCS), which also displays a blue screen while it
boots.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software and hardware versions:
Cisco Media Convergence Server (MCS) 78xx
The information in this document is based on the Cisco MCS 78xx.
The information in this document was created from the devices in a specific lab
environment. All of the devices used in this document started with a cleared (default)
configuration. If your network is live, make sure that you understand the potential
impact of any command.
environment. All of the devices used in this document started with a cleared (default)
configuration. If your network is live, make sure that you understand the potential
impact of any command.
Conventions
Refer to
Cisco Technical Tips Conventions
for more information on document
conventions.
Problem
When the MCS server, which is either loaded with Cisco Unity or Cisco
CallManager, is booted up, the Windows splash screen comes up and then displays
a blue screen with this error: STOP: 0x0000007B Inaccessible Boot Device.
CallManager, is booted up, the Windows splash screen comes up and then displays
a blue screen with this error: STOP: 0x0000007B Inaccessible Boot Device.
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Problem
Solution
Solution 1
Solution 2
Solution 3
Cisco Support Community - Featured
Conversations
Conversations
Related Information