Cisco Cisco Live Event Controller 데이터 시트
Data Sheet
Page 2 of 3
In addition to logging received messages, the Event Logger also provides detailed
decoding for DPI messages according to the SCTE-35 standard. This feature allows
uplink operators to view all contents of SCTE-35 Start and Stop messages to assist
receiving sites in diagnosing headend configuration issues, without having to refer to a
protocol analyzer.
decoding for DPI messages according to the SCTE-35 standard. This feature allows
uplink operators to view all contents of SCTE-35 Start and Stop messages to assist
receiving sites in diagnosing headend configuration issues, without having to refer to a
protocol analyzer.
The Event Logger is system agnostic, allowing it to monitor, correlate, and log DPI
messages in Cisco PowerVu
messages in Cisco PowerVu
®
and ROSA
®
systems as well as encoding and decoding
solutions from third party vendors.
Figure 2.
Event Logger - SCTE-35 Message Received view
Key Features
●
108 GPI contact sensors
●
6 ASI inputs
●
SPTS and MPTS support
●
Detailed decoding of SCTE-35 messages
●
Data archiving
●
Real-time and offline operation
Specifications
Table 1.
Release 1.0
Functions
Features
Transport Input
DVB-ASI Output
3 ASI Outputs
Connector BNC
Impedance 75
ohms
TS Packet Length
188 bytes
ASI Bit Rate
213 Mb/s