Cisco Cisco D9824 Advanced Multi Decryption Receiver 설치 가이드
Chapter 5 Web GUI Setup and Monitoring
214
OL-29015-01
Configuring the DPM MPEGoIP Output Details
The following procedure defines all the available fields. For a typical setup of the
DPM, see Typical set up for Digital Program Mapping (DPM) (on page 221).
DPM, see Typical set up for Digital Program Mapping (DPM) (on page 221).
Note: After you make any changes, a successfully updated (session open) message
appears. The changes are displayed, but not saved. You must click Apply to save
and apply the changes.
1 From the user interface of the D9824, choose Transport Stream > Digital
appears. The changes are displayed, but not saved. You must click Apply to save
and apply the changes.
1 From the user interface of the D9824, choose Transport Stream > Digital
Program Mapping under MPEG over IP Output. The Digital Program Mapping
page is displayed.
page is displayed.
2 For each DPM Program Entry, it displays the input channel number (Chl #) and
channel name (Name), whether the PE is passed, dropped, or mapped (Action),
the output channel (Output Ch#), and the PMT PID (PMT PID).
Note: Any changes made to the MOIP DPM values automatically changes the
Mode Status to Edited by User in the MPEG over IP Output page.
the output channel (Output Ch#), and the PMT PID (PMT PID).
Note: Any changes made to the MOIP DPM values automatically changes the
Mode Status to Edited by User in the MPEG over IP Output page.
3 Click the PE1 to PE32 program entry radio button you want to edit.