Cisco Cisco D9800 Network Transport Receiver 데이터 시트
© 2009-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 6
Data Sheet
Features - Software Version 4.3
4:2:0 High Definition MPEG-4 AVC decoding
◦
HP @ L4, 1080i, 720p (59.94/50 Hz)
◦
Low-delay mode: 300 ms @ ASI, 450ms @ IP, with Cisco D9093, D9094, or
D9094SE encoder
D9094SE encoder
4:2:0 Standard MPEG-4 AVC decoding
◦
MP @ L3, 720 x 480i, 720 x 576i (59.94/50 Hz)
◦
Low-delay mode: 300 ms @ ASI, 450ms @ IP, with Cisco D9093, D9094, or
D9094SE encoder
D9094SE encoder
4:2:2CSC Standard Definition and High Definition MPEG-4 AVC decoding
◦
4:2:2CSC compression is a unique compression scheme that enables standard 4:2:0
decoders to decode the 4:2:0 part of the compressed video.
decoders to decode the 4:2:0 part of the compressed video.
◦
Low-delay mode: 360 ms @ ASI, 510 ms @ IP, with D9093 or D9094 Encoder
Four embedded AES pairs
◦
MPEG-1 Layer II Audio
◦
MPEG-2 AAC Audio
◦
SMPTE-302M uncompressed audio and Dolby
TM
E pass-through
VANC Support
Advanced error correction functions help to ensure high quality of service
◦
Pro-MPEG FEC
◦
FEC and ARQ
◦
For video transmission using IP network, Forward Error Correction (FEC) and
Automatic Repeat Request (ARQ) are provided for network error correction. The
combined use of FEC and ARQ provides high quality of service.
Automatic Repeat Request (ARQ) are provided for network error correction. The
combined use of FEC and ARQ provides high quality of service.
◦
ARQ enables retransmission of packets lost in the network, and the user may adjust
the retransmission buffer size to optimize the end-to-end delay.
the retransmission buffer size to optimize the end-to-end delay.
Decryption - BISS 1/E
Bidirectional Voice Intercom over IP
SNMP v2 control and traps, ROSA
®
Driver
Optional Features
DVB-ASI Input module