Cisco Cisco D9800 Network Transport Receiver 데이터 시트

 

 

 

The Model D9846 Professional Decoder is 
designed to receive broadcasts using MPEG-2 
4:2:2 or 4:2:0 digital compression technology. It is 
ideally suited for contribution, broadcast and professional applications requiring 4:2:2 decoding. An optional IP 
interface is available for contribution networks. 
 
Digital Video and Audio Outputs 
SDI digital video with embedded audio and AES/EBU digital audio are provided for interfacing with studio quality 
equipment. Dolby

®

 E pass-through is also available. 

Secured Broadcast Reception 
Availability of BISS modes 1 and E provides protected distribution of video, audio and/or data broadcasts to 
multiple locations. To further support interoperability, DVB-CI allows the receiver to be used in different broadcast 
networks with the most common conditional access (CA) systems.  
 

•  MPEG-2/DVB 4:2:2/4:2:0 video decoding 

•  NTSC, PAL B/G/I/M/N/D, SECAM L/B/G/K1 video formats 

•  Video resolution interpolation (Pan-Scan, letter box or pass-through) 

•  Aspect ratio conversion (4:3, 16:9) 

• ASI 

input 

•  Dual ASI outputs 

•  Configured and controlled via front panel LCD  

•  Supports Basic Interoperable Scrambling System (BISS) conditional access  

•  Two SDI outputs with embedded audio and VBI 

•  Two analog stereo outputs  

•  Two AES/EBU digital audio outputs 

•  VBI re-insertion of WST, WSS, VPS, VITC, AMOL I, AMOL II, CC, in composite and SDI 

• Dolby

®

 E pass-through (audio 1 & 2 on base unit, audio 2, 3 & 4 on 4-channel version) 

• Dolby

®

 Digital (AC-3) downmixing (left and right channels) 

•  EBU Teletext and DVB subtitling 

•  Genlock for frame synchronization 

•  Redundancy support via two General Purpose Indicator (GPI) contact closures 

•  Two broadcast video outputs 

•  SNMP control and monitoring 

•  Web-based management (10/100 Base-T) 

•  Two-slot, DVB-CI common interface 

 

•  DVB-S QPSK input 

•  MPEG over IP input 

•  Link and source redundancy for IP inputs 

•  3

rd

 and 4th audio outputs (analog and digital)