Cisco Cisco D9800 Network Transport Receiver 데이터 시트

 

 

The Model D9844 Commercial Decoder is 
designed to receive broadcasts using MPEG-2 
4:2:0 digital compression technology. It is ideally 
suited for decoding digitally compressed signals for further distribution into direct-to-home networks. Optional IP 
input or output interfaces provide for next generation network architecture integration. 

Secured Broadcast Reception 
Availability of BISS modes 1 and E provides protected distribution of video, audio and/or data broadcasts to 
multiple locations. To further support interoperability, DVB-CI allows the receiver to be used in different broadcast 
networks with the most common conditional access (CA) systems.  
 

•  Single or dual decoder configuration 

•  MPEG-2/DVB 4:2:0 video decoding 

•  NTSC, PAL B/G/I/M/N/D, SECAM L/B/G/K1 video formats 

•  Video resolution interpolation (Pan-Scan, letter box or pass-through) 

•  Aspect ratio conversion (4:3, 16:9)  

•  Configured and controlled via front panel LCD  

•  Supports Basic Interoperable Scrambling System (BISS) conditional access  

•  Two analog stereo outputs per program  

•  VBI re-insertion of WST, WSS, VPS, VITC, CC, AMOL I, AMOL II 

•  EBU Teletext and DVB subtitling 

•  Redundancy support via two General Purpose Indicator (GPI) contact closures 

•  SNMP control and monitoring 

•  Web-based management (10/100 Base-T) 

•  Two-slot, DVB-CI common interface 

 

• Dolby

®

 Digital (AC-3) downmixing (left and right channels) 

•  DVB-S QPSK input 

•  DVB-S2 Single Input QPSK/8PSK 

•  DVB-S2 16APSK, VCM, ACM 

•  Multiple input transport stream (MSI) 

• ASI 

input 

•  Dual ASI outputs 

•  MPEG over IP input (without FEC) 

•  Link and source redundancy for IP inputs 

•  MPEG over IP output (without FEC) 

•  MPE IP Data output 

•  Two SDI outputs with embedded audio and VBI 

•  Two AES/EBU digital audio outputs per program 

•  Second video decoder with two audio outputs