Cisco Cisco Content Delivery Engine 250 설치 가이드
2 IPMI Firmware Upgrade Process
There are three processes for the IPMI firmware update:
- Using the Linux Yafuflash utility, section 2.1
- Using a bootable USB stick, Section 2.2
- Using the CDE250’s dedicated IPMI Ethernet port, Section 2.3
- Using a bootable USB stick, Section 2.2
- Using the CDE250’s dedicated IPMI Ethernet port, Section 2.3
2.1 IPMI Firmware Upgrade Process using a bootable USB
stick
Requirements:
- PC running Windows operating system
- USB stick (512MB or larger)
- Keyboard and monitor or direct I/O access., i.e. KVM
- USB stick (512MB or larger)
- Keyboard and monitor or direct I/O access., i.e. KVM
Please follow the process below in order to upgrade the IPMI firmware to v3.06.
1) Create a FreeDOS USB Boot stick using the following procedure:
a) Insert a blank USB memory stick into your Windows based PC
b) Download and save the “rufus” USB boot device creator from the following URL:
b) Download and save the “rufus” USB boot device creator from the following URL:
c) Start rufus by opening the “rufus_vx.x.x.exe” file. (note: this document was created
using rufus v1.2.0.183)
d) Insert a USB stick to be formatted with FreeDOS
e) Select the “Device” to use as the FreeDOS boot device
f) File system: “FAT32”
g) Enter a “New volume label”, i.e. IPMIUP
h) Select “Quick Format”
i) Select Create a bootable disk using: “FreeDOS”
j) Click on “Start”, the Boot stick format should proceed
e) Select the “Device” to use as the FreeDOS boot device
f) File system: “FAT32”
g) Enter a “New volume label”, i.e. IPMIUP
h) Select “Quick Format”
i) Select Create a bootable disk using: “FreeDOS”
j) Click on “Start”, the Boot stick format should proceed