Cisco Cisco TV Streamer Application 릴리즈 노트
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
24
Release Notes for Cisco TV CDS 2.3.3
OL-24132-02
Upgrading to Release 2.3.3
Video Quality
•
CSCtg36215
Symptom:
Macroblocking for up to a second after a transition from FF or REW to 1x Play.
•
CSCti79546
Symptom:
Content ftpout size mismatched the original size.
•
CSCti19189
Symptom:
Occurs during tick mode when fast-forward is selected the IMG timer shows 2:10, then when
selecting play, the IMG timer shows 2:25 and the video jumps. Other times if fast-forward has been
selected and then play is selected, a five-second jump can be seen.
selecting play, the IMG timer shows 2:25 and the video jumps. Other times if fast-forward has been
selected and then play is selected, a five-second jump can be seen.
•
CSCtj24141
Symptom:
If OLES encryption is enabled in an IP VOD environment, and jitter is measured at stream output
from CDS TV, the jitter will exceed the MPEG-2 specs.
from CDS TV, the jitter will exceed the MPEG-2 specs.
•
CSCtj59696
Symptom:
Content fails ingest.
•
CSCtk32629
Symptom:
Content won’t ingest.
Upgrading to Release 2.3.3
For new installation and upgrade procedures, see the Cisco TV CDS 2.3 Installation, Upgrade, and
Maintenance Guide.
Maintenance Guide.
If custom modifications have been made to the root crontab (for example, in ISA environments the MSV
script to delete orphaned content), create the /etc/cds_noCrontabOverwrite file before upgrading the TV
CDS software in order to avoid the custom crontab being overwritten. To create this file, enter the
following command:
script to delete orphaned content), create the /etc/cds_noCrontabOverwrite file before upgrading the TV
CDS software in order to avoid the custom crontab being overwritten. To create this file, enter the
following command:
touch /etc/cds_noCrontabOverwrite
When upgrading to Release 2.3.3 or installing Release 2.3.3, you must run the cdsconfig script in order
to disable the Redirect Server for RTSP Deployments. The following prompt has been added to the
cdsconfig script:
to disable the Redirect Server for RTSP Deployments. The following prompt has been added to the
cdsconfig script:
Do you want to enable Redirect Server ? (yes/no) [y]
Select no if you need to disable the Redirect Server. It is not required to run cdsconfig for ISA/RTSP
Shim Deployments.
Shim Deployments.