Cisco GainMaker Optoelectronic Node 1GHz with 55 70 MHz Split 데이터 시트
© 2010-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information
Page 2 of 14
Features
GainMaker RS Node uses plug-in accessories common to all GainMaker products
Cable to Linear EQ in amplifiers
Interstage Equalizer (ISEQ) provides 14.5 dB of Linear tilt
RF interface board in the main input port diplex filter location provides access to
forward and reverse paths in order to route the RF signals to the lid
forward and reverse paths in order to route the RF signals to the lid
Amplifier cover provides access to RF interface board RF ports
Two optical transmitter positions in the lid
One optical receiver position in the lid
Optional plug-in Status Monitoring
Optional reverse redundancy option; two reverse transmitters (one in “hot standby”)
available for the non-segmented node case
available for the non-segmented node case
Fiber entry ports on one end of the lid
Fiber management tray provides easy access to fiber connections and folds back to
provide access to optical transmitter and receivers
provide access to optical transmitter and receivers
Power supply mounted in housing lid for efficient thermal dissipation
Reverse input pad and RF test point for each reverse input port on GainMaker
launch amplifier allow optimum reverse path design and alignment
launch amplifier allow optimum reverse path design and alignment
Optional Dual Redundant Receiver provides ability to switch to redundant optical
power in case of fiber cut
power in case of fiber cut