Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split 데이터 시트
GainMaker Optoelectronic Node – 5-55/70-1002 MHz
8
Ordering Information
The GainMaker Node is available in a wide variety of configurations. The GainMaker Ordering Matrix provides
ordering information for configured node stations, existing amp to node upgrade kits, and launch amplifiers. This
page contains ordering information for required and optional accessories. Please consult with your Account
Representative, Customer Service Representative, or Applications Engineer to determine the best configuration
for your particular application.
ordering information for configured node stations, existing amp to node upgrade kits, and launch amplifiers. This
page contains ordering information for required and optional accessories. Please consult with your Account
Representative, Customer Service Representative, or Applications Engineer to determine the best configuration
for your particular application.
Required Accessories for RF Module
Part Number
Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20.5 dB
•
1 required for forward input
•
1 required for AGC, if applicable*
•
4 required for reverse (3 input, 1 output)
*To determine AGC pad value, subtract 34dB from the design value main port RF output level
at the AGC pilot frequency.
at the AGC pilot frequency.
589693 (0 dB)
sequentially thru
589734 (20.5dB)
Plug-in Forward Equalizer - Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz
•
•
1 required for forward input
4007228 (0 dB)
sequentially thru
4007248 (30 dB)
Plug-in Reverse Equalizer – Available in 1 dB steps from 0 to 12 dB at 55 MHz
•
1 required for reverse output - unless design value is 0 dB (0 dB EQ is provided)
712719 (0 dB) and
712679 (1 dB)
sequentially thru
712690 (12 dB)
Plug-In Signal Director for Auxiliary output – 1 required (HGD only), choose from below:
• Jumper
• 2-way
Splitter
•
DC-8 Directional Coupler
•
DC-12 Directional Coupler
4008208
4008364
4008365
4008366
4008364
4008365
4008366
Required Accessories for Optical Components
Part Number
279500 (0 dB)
sequentially thru
279513 (13 dB)
in 1 dB steps
504151 (14 dB)
sequentially thru
504157 (20 dB)
in 1 dB steps
Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20.5 dB
•
1 ea required for Transmitter and Receiver(s).
565231 (0.5 dB)
sequentially thru
565251 (20.5 dB)
in 1 dB steps