Cisco GainMaker Optoelectronic Node 1GHz with 42 54 MHz Split 설치 가이드
Chapter 2 Installation and Configuration
To Attach the Service Cable Connector
Complete the following steps to attach the connector to the housing.
1 Unscrew the rotational nut from the main nut.
1 Unscrew the rotational nut from the main nut.
2 Slide the main nut forward to disengage the fiber protective sleeve.
3 Feed the jacketed fibers one at a time through the fiber entry port.
3 Feed the jacketed fibers one at a time through the fiber entry port.
20
OL-29644-03