Cisco Headend System Release 2.5 사용자 가이드

78-738186-01 Rev B

signonCount Utility

2-9

The signonCount Utility Data Fields

Data Fields

The following tables list the fields included on the interface of the signonCount

utility and provide an explanation of the meaning associated with each field.

Columns

Descriptions

TIME

FIX

Mode

Feb 21 09:40

Feb 21 09:41

Feb 21 09:42

Feb 21 09:43

Feb 21 09:44

Feb 21 09:45

Feb 21 09:46

Feb 21 09:47

Feb 21 09:48

Feb 21 09:49

OFF

•

TIME—The system polls the communication link

between the QPSK modulators and the DNCS every

minute and records the date and time.

•

FIX Mode—This field reveals whether the

signonCount utility is configured to automatically

correct DHCT sign-on problems (Fix Mode On) or

whether the utility is running in information-only

mode (Fix Mode Off).
Note: By default, the utility runs in Fix Mode Off

mode.
Important: Do not change modes unless you have

been instructed to do so by Cisco Services engineers.

Verified

Rcvd Sent

DAVIC

Made

62 59

•

Verified Rcvd—The QPSK modulator reports the

number of DHCTs that have made sign-on requests.

•

Verified Sent—The DNCS has allocated this number

of DHCT IP addresses based upon the sign-on

requests.

•

DAVIC Made—The QPSK modulator reports the

number of DHCTs that have connected to the QPSK

modulator and are waiting for UN-Config information.

UN-Config

Rcvd Sent

0 0

4 4

3 3

6 6

4 4

8 8

3 3

5 5

2 2

•

UN-Config Rcvd—This number of DHCTs are

requesting a UN-Config message from the DNCS.
Note: The UN-Config message contains information,

like an IP address, that allows DHCTs to sign on to the

network.

•

UN-Config Sent—The DNCS has sent this number of

UN-Config messages to DHCTs, allowing the DHCTs

to sign on to the network.
Note: At this point, the DHCTs are physically in two-

way mode and have completed the sign-on process.