Cisco Model D-PCG1000 PowerKEY CAS Gateway 설치 가이드
Chapter 4 Provision the IF GoQAM
68
4004834 Rev D
Set Up UpConverter Basic Parameters
The UpConverter Name is the name assigned to the upconverter.
Ports
The following table lists the Set Up UpConverter Ports field descriptions.
The following table lists the Set Up UpConverter Ports field descriptions.
Field
Description
Reserved TSID Range
Displays the available range of transport stream
IDs
50 – 45000 for Overlay systems
11 – 50999 for Regional Control System (RCS)
Input UpConverter Stream
ID
Displays the transport stream ID of the currently
selected upconverter
RF Output Ports
The following table lists the Set Up UpConverter RF Output Ports field descriptions.
The following table lists the Set Up UpConverter RF Output Ports field descriptions.
Field
Description
Modulation
Displays the frequency modulation for the RF
Output ports
Note: The default is 64-QAM for ITU J.83
Note: The default is 64-QAM for ITU J.83
Annex B.
Transport Stream ID
Displays the identifier of the transport stream
ID for each RF Output ports
Channel Center Frequency
(MHz)
Displays the frequency assigned to the
upconverter
Continuous Wave Mode
This option is not operational at this time.
Mute RF Output
This option is not operational at this time.
Function Keys
The following table describes the function keys on the Set Up UpConverter window.
The following table describes the function keys on the Set Up UpConverter window.
Field
Description
Add
Allows you to add a new RF Output port
Open
Allows you to edit an RF Output port
Delete
Allows you to delete an RF Output port
Save
Saves changes and closes the window
Apply
Makes changes without closing the window