Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split 설치 가이드
HSIA Diagnostics Page: Ping Command
4037424 Rev A
57
Input Parameters
Description
Timeout
Range 1 to 60 seconds. Standard value is 5 seconds.
Controlling the Ping Test
The Ping Test is controlled by the following buttons.
Button
Description
Start Test
Starts the ping test. Each of the values provided in the input
fields is evaluated for validity.
fields is evaluated for validity.
If the host name field is blank, the test will not proceed.
(The exception is leaving it blank when a previous name
had been entered. In that case, that name will be used.)
(The exception is leaving it blank when a previous name
had been entered. In that case, that name will be used.)
Range checking on the parameters. Any parameter out
of range will be ignored, and the default value used.
of range will be ignored, and the default value used.
Any issues with the parameters will be displayed at the top
of the results box. When the test is started, the web page will
begin to automatically refresh. Also, a message will be
displayed:
of the results box. When the test is started, the web page will
begin to automatically refresh. Also, a message will be
displayed:
Ping in use from <source>; pkings xxx; size yyy; timeout
zzz seconds
zzz seconds
indicating the parameters actually in use. This message is
also in the text box.
also in the text box.
Abort Test
Stops any ping test currently in progress.
Test Results
Clears the results window.
Test Results
Below the test control buttons is a text area that displays the results of the ping test.
Any issues with the parameters will be displayed at the top of the results box.
During a test, the web page will automatically refresh to show the current results.
This refresh stops once the test is completed.
Any issues with the parameters will be displayed at the top of the results box.
During a test, the web page will automatically refresh to show the current results.
This refresh stops once the test is completed.
The results area permits the user to select results and copy them for pasting into
another program. This is accessed using one of the standard web browser methods:
another program. This is accessed using one of the standard web browser methods:
Left-click the box and press Ctrl-A (select all)
Right-click the box and click Select all
Use the mouse cursor to select those lines of interest