Cisco Headend System Release 2.7 사용자 가이드
Chapter 3 Understanding Diagnostic Screens
48
4000308 Rev B
Color-Coded Field Text
The color of the field text within the diagnostic screens varies depending on the
condition of the specific component. The following table lists the conditions that the
color represents.
condition of the specific component. The following table lists the conditions that the
color represents.
Field Text Color
Condition
Green
Indicates a passed condition for a one-time test or self-test
White
Indicates a normal or and expected condition
Amber
Indicates an unusual condition
Red
Indicates an error, an unexpected condition, or an inability
to obtain status information for that particular field
to obtain status information for that particular field
Status Line Descriptions
The status line appears at the bottom of all diagnostic screens. The following table
describes the field information contained in the status line.
describes the field information contained in the status line.
Field Information
Description
Time
Provides the time of day at which the screen was last
displayed or refreshed
displayed or refreshed
Ref
Provides the number of seconds between screen
refreshes for the current page (example, Ref:5)
refreshes for the current page (example, Ref:5)
Note: If the current page displays Play, it means that the
information on the screen does not automatically refresh.
To refresh the information on a screen that displays Play,
press the Play key on the remote control.
information on the screen does not automatically refresh.
To refresh the information on a screen that displays Play,
press the Play key on the remote control.
Pg
Provides the current page number and the total number of
diagnostic screen pages (current/total)
diagnostic screen pages (current/total)
[Exit] or [Diamond]
Indicates to choose one of the following keys to press to
exit the diagnostic screens:
exit the diagnostic screens:
For the Explorer 2000, 2000 Rev 3, or 3000 DHCTs,
press [Diamond] on the front panel of the DHCT
press [Diamond] on the front panel of the DHCT
For all other Explorer DHCTs, press [Exit] on the front
panel of the DHCT
panel of the DHCT
For all Explorer DHCTs, press the EXIT key on the
remote control.
remote control.