Cisco Headend System Release 2.5 설치 가이드
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Chapter 3 Reset DHCT Configuration with the delete-sm Utility
22
4020695 Rev C
Reset the Configuration of DHCTs to Support
Session-Based Encryption
Session-Based Encryption
The procedures in this section describe how to use the delete-sm utility in
conjunction with the ..OOS.. option in order to prepare a site to support SBE.
conjunction with the ..OOS.. option in order to prepare a site to support SBE.
Resetting the Configuration of DHCTs to Support Session-Based Encryption
Follow these instructions to use the ..OOS.. option of the delete-sm utility in order to
help a site support SBE.
1 If necessary, open an xterm window on the DNCS.
2 Choose one of the following options:
help a site support SBE.
1 If necessary, open an xterm window on the DNCS.
2 Choose one of the following options:
To reset the configuration of out-of-service DHCTs without also deleting
records from the secure_micro table for in-service DHCTs with no active
packages, type delete-sm ..OOS.. and then press Enter.
records from the secure_micro table for in-service DHCTs with no active
packages, type delete-sm ..OOS.. and then press Enter.
To reset the configuration of out-of-service DHCTs and to also delete the
records from the secure_micro table for in-service DHCTs with no active
packages, type delete-sm -o ..OOS.. and then press Enter.
records from the secure_micro table for in-service DHCTs with no active
packages, type delete-sm -o ..OOS.. and then press Enter.