Cisco Headend System Release 2.7 설치 가이드
Upgrade a DTACS Server from a CD
78-4036705-01 Rev D
57
Upgrade a DTACS Server from a CD
1 Remove the maintenance DVD and insert the upgrade CD.
2 Type cd /cdrom/cdrom0 and press Enter.
3 Type install_pkg and press Enter.
2 Type cd /cdrom/cdrom0 and press Enter.
3 Type install_pkg and press Enter.
a Type y to continue
b Press Enter to continue. The system asks if you have backed up your DNCS
b Press Enter to continue. The system asks if you have backed up your DNCS
host.
c Type yes and press Enter.
d Type d (default) or enter a value and then press Enter to define the number
d Type d (default) or enter a value and then press Enter to define the number
of days before EMMs are deleted. The system prompts you to confirm the
installation configuration.
installation configuration.
e Review the install configuration parameters. If they are OK, press c to
continue. Otherwise, follow the on-screen instructions to modify.
4 When complete, check the following logs for errors:
- /var/log
- /dvs/dtacs/tmp/corefiles (check for any core dumps)
- /var/sadm/system/logs (includes install logs).
You should see messages that say SUCCESS: No differences found for dtacsdb.
5 Did you perform a DVD upgrade (live upgrade) prior to the CD upgrade?
If yes, go to Post-Installation Tasks (on page 59).
If no, go to step 6.
6 Change to dtacs user; then type dtacsStart and press Enter to restart the DTACS
processes.
Important: If all WUIs do not display, you should stop and restart Tomcat by
entering the following as root:
Important: If all WUIs do not display, you should stop and restart Tomcat by
entering the following as root:
# svcadm disable svc:/network/apache-tomcat:default
# svcadm enable svc:/network/apache-tomcat:default
7 Is your DTACS system operating properly?
If yes, go to step 8.
If no, troubleshoot your system or call Cisco Services to remedy any issues.
Once the system is operating correctly, go to step 8.
Once the system is operating correctly, go to step 8.
8 Remove the upgrade CD and re-insert the maintenance DVD.
9 Type /cdrom/cdrom0/s3/backup_restore/mirrState -a and press Enter to sync the
9 Type /cdrom/cdrom0/s3/backup_restore/mirrState -a and press Enter to sync the
mirrors.