Cisco Headend Digital Broadband Delivery System 설치 가이드
Installation Process Overview
78-4004034-01 Rev C
7
Installation Process Overview
Introduction
This section provides a brief overview of the tasks you must complete to install xOD
1.6 on your system. If you are upgrading your xOD version to xOD 1.6, go to
Upgrade Process Overview (on page 9).
Before You Begin
Before you install xOD on your system, be sure you have met all of the hardware
and software requirements specified in Installation and Upgrade Requirements (on
page 3). Also, make sure you have all of the package components listed in
Installation and Upgrade Package (on page 6).
Install the Oracle Patch
Before you begin the xOD 1.6 upgrade, install the Oracle patch that is needed to
make the ASI server compliant with 2007 daylight saving time (DST) requirements.
Oracle has developed their own software installation instructions. Reference the
Oracle instructions and install the DST software now.
Time To Complete
Installing this version of xOD takes approximately 4 to 6 hours to complete.
Performance Impact
Installing this version of xOD does not impact network performance.
Process Overview
You must complete the following tasks to install xOD on your system.
1 Make sure all of the DBDS hardware components responsible for processing
1 Make sure all of the DBDS hardware components responsible for processing
xOD content are physically installed in your system and configured in the
DNCS. This includes one VOD server per xOD service you plan to offer, as well
as the ASI server. In addition, ISA systems must include a BMS server.
Note: Refer to the applicable hardware installation guides and the Digital
Note: Refer to the applicable hardware installation guides and the Digital
Network Control System (DNCS) Online Help.
2 Make sure you have defined one service group per VOD server installed.
Note: Refer to the Digital Network Control System (DNCS) Online Help.
3 Configure your DNCS to support xOD services.